1:1 test for the new roof of the NEST HiLo unit. The very lightweight and extremely thin roof system is manufactured in a completely new process that requires much less concrete and sets new ecological standards.
A very cool custom garage with a large bi-fold door along the sidewall. The customer wanted lots of access to all his toys. To make this happen, we had to design a large Jack Beam to carry the roof load and support the door.
This is a 30,000 sqft facility that we shipped to Croatia. Clearspan design for maximium usablity. This picture also shows how much light is produced by just a few wall lites along each sidewall. A great way to save on electric cost!
Latest custom home project we're working on. Preliminary design is almost complete. This home features a 2 car garage, open floor plan with large windows and a second floor balcony. To be constructed in Morgan Hill, CA.
Administration building for the Marine Corps Base Camp Pendleton, CA. The building is designed with a standing seam roof for maximum protection against leaking and the elements. A nice architectural feature is the split face block that wraps around the bottom 3' of the building.
Preliminary design of a distribution facility in Sacramento, California. The project consists of 3 sections creating a T shaped structure. The roof was designed to carry solar panels which will power the facility.
I very nice 2000 sqft garage in Central Florida. This customer is storing his beautiful RV along with other toys in the building. Even the smaller buildings are designed and built with the same heavy duty construction as our larger buildings.
A maintenance building in Colorado mountains for the Parks Department. This building is part workshop and part office space. Half the building was designed with second floor mezzanine for offices and administration.
Over 15,000 sqft of commercial space located in Ft. Pierce, FL . The bottom 8' of the building is split-face block with metal sheeting above. We also designed the custom blue canopy alone the wall for shade. This is a great example of how you can dress up a metal building and really make it stand out.
A trailer of Primary Structural Steel ready to be shipped out. All steel member are labeled for easy identification and quick staging on the job site. Our buildings are always shipped with easy unloading in mind with a basic forklift.
Working on a design for a building to be used as a Church in Rochester, NY. This building has multiple sections and a hip roof design. The building was designed for 40 psf roof snow load and even higher loads on the lower roof sections for drift loads.
T-Frame Solar parking canopies for Penski Ford in La Mesa, California. All structural steel was galvanized for long term protection from the elements. The canopies were designed for both high seismic loads of Southern California and the weight of the solar panels. These canopies provide shade from the hot sun and produce clean renewable energy. Southwestern Solar Systems erected the structures and installed the solar system.
We designed this building to support stud framed walls with a large spandrel beam near the eave. This beam will take the loads of the wall framing and transfer it to the structural framing. This building will ultimately have red brick exterior walls and our metal roof.
This is a roof canopy designed for an Ferrari and Maserati auto dealership in Colorado. All structural steel was painted on the job site for extra protection and a very clean look. For this application no x-bracing was used in any of the walls for 100% usable space. Large portal frames were designed to provide lateral bracing. The building was erected adjacent to the service center for a covered drop off/pickup area.
Custom home design for budgetary purposes. About 6000 sqft under roof with a large garage section. The building features an upstairs loft, large wrap around porch and standing seam roof. Project to be constructed in Fayetteville, TN.
New installation of a 10 Ton Proserv Bridge Crane in one of our buildings. We can design and engineer the building framing to handle the loads and vibrations of a crane system. We typically provide brackets on our columns for support and a crane specialist will install the rest of the system once the building is erected.
Finished product! The Contractor did a great job finishing off our building in Downtown Atlanta. Architectural panels and decorative elements really give this building a unique look. From basic to custom projects, we have you covered. @opusplaceatlanta
The Pompano Pet Lodge is set to enter the engineering process and will be designed for 170mph hurricane force winds. This new project is located in Pompano, FL and will feature over 8000 sqft of covered area for dogs to safely have fun. The enclosed section of this building will used a viewing room /drop off for pet owners.
Beautiful warehouse located in Naples, FL. Building features decorative masonry parapet walls with internal gutter system. The roof panels are Cool White which is our most energy efficient paint finish. This finish helps keep the building cool in the hot summer sun while carrying a 40 year warranty!