Making some more camera top handles for @ignitedigiaustralia today. Also testing out some new endmills which are giving a nice finish 👍
These handles have a nice textured finish on the side for grip, and are super smooth all over, no sharp corners or edges here 😉
🔸En Abstract Training Center te ofrecemos una promo de 30% de descuento si vienes a cualquiera de nuestros cursos en modalidad presencial con 4 amigos más. 🙌
¿En cuál curso estas interesado? escríbenos a email@example.com o visita nuestro calendario. 😉 Aprovecha esta increíble promoción válida hasta el 01 de Septiembre. #Autodesk
My sister was about to throw this old gps stand away and I was just searching for a microphone stand. Also, I was thinking about what to do with the flexible PLA sample I had. Using #fusion360 I created e printed this. #3dprinting#3d#flexiblepla#pla
Hur jag kommer bygga vätgasgeneratorerna.
Kommer bli 3st då 2 är igång på läge 1 och läge 2 blir det alla 3.
Blev såklart tvungen att cadda upp allt så jag kan ev bygga en mindre modell sen för att se hur det hela blir i slutändan ☺!
Modeled this two part E3D V6 mount for my TAZ because I didn't find a good match on thingiverse. It uses heated inserts and two m3s to mount. Printed in PETG.
@lulzbot3d @e3donline #3dprinting#petg#industrialdesign#fusion360
Taught a Fusion 360 class at @familab with a GREAT turnout. Thanks to all who attended, we'll do it again next weekend.
Shoutout to @curtis.chan for sending some swag, the magnets and hotkey stickers were a huge hit!
As a thank you to all my followers I'm going to give away some swag, it's very easy to enter yourself in the raffle, just repost and your entered! Just make sure you include the hashtag #Dartmouth_CNCswagGivaway in your repost so I can keep track of all entries. All entries must be following me or it will not count, this contest will run for 1 week...HAVE FUN AND GOOD LUCK! I will ship international.
I would also like to thank the following companies for donating towards this giveaway, @adskfusion360 @mastercamcadcam @matsuurausa @5thaxis #fusion360#mastercam#5thaxis#matsuura#swag#givaway#repost#repostapp#Dartmouth_CNCswagGivaway
These are the last of Liberty Precision Machine's spinners! When these are gone that is it! No more will be made, moving on to some new projects. All are aluminum except for one titanium spinner on the bottom left. I have plenty of buttons and both styles of bearings in stock. Order at www.libertyprecisionmachine.com (link in bio). Get them before they are gone!