an online Instagram web viewer

#replicaprop medias

Photos

Some of the reference images for the #rabbitinred #matchbook prop (turned t-shirt) that I recreated for you #horrorfans out there.⠀
⠀
It's a great little horror movie prop replica - a bit obscure, but not too obscure (the Rabbit in Red Lounge was featured much more in Rob Zombie's remake). The front features the Rabbit in Red logo, along with a printed distressed strike strip (it's illegal to place an actual strike strip on the front of a matchbook these days). The back features the address of the Rabbit in Red Lounge as used in Rob Zombie's remake. I thought this was fair, as the back of the matchbook is never shown in the original.⠀
⠀
#rabbitinred #rabbitinredlounge #haddonfield #horrorfilm #horrorclub #slasherfilm #matchbook #philumeny #movieprop #replicaprop #propreplica #robzombie #horrorfilmprops #halloween #michaelmyers #etsyhalloween #designedbymonkeys #personalproject
Some of the reference images for the #rabbitinred  #matchbook  prop (turned t-shirt) that I recreated for you #horrorfans  out there.⠀ ⠀ It's a great little horror movie prop replica - a bit obscure, but not too obscure (the Rabbit in Red Lounge was featured much more in Rob Zombie's remake). The front features the Rabbit in Red logo, along with a printed distressed strike strip (it's illegal to place an actual strike strip on the front of a matchbook these days). The back features the address of the Rabbit in Red Lounge as used in Rob Zombie's remake. I thought this was fair, as the back of the matchbook is never shown in the original.⠀ ⠀ #rabbitinred  #rabbitinredlounge  #haddonfield  #horrorfilm  #horrorclub  #slasherfilm  #matchbook  #philumeny  #movieprop  #replicaprop  #propreplica  #robzombie  #horrorfilmprops  #halloween  #michaelmyers  #etsyhalloween  #designedbymonkeys  #personalproject 
⚔️Ignis daggers/ shortswords/ DAGGS for Chay! @caitandchay ⚔️ They still need several more coats of @poly.props SEAL but I'm honestly in love with how this build turned out.
I literally recommend Poly Props supplies to everyone and their CF100 has been an absolute dream to work with. 
I've been pulling 15-16 hours a day down the workshop and it's probably only going to get crazier! So sorry for being afk but I hope you guys think the results are worth it!

#ignis #ignisscientia #finalfantasyxv #finalfantasy #chocobros #chocobo #ffxv #igniscosplay #prompto #promptocosplay #prop #propmaking #propreplica #mcm #mcmlondon #cosplay #ukcosplay #ffcosplay #rpf #replica #replicaprop #commission #madcatprops #foam #foambuild #craftyourfandom
⚔️Ignis daggers/ shortswords/ DAGGS for Chay! @caitandchay ⚔️ They still need several more coats of @poly.props SEAL but I'm honestly in love with how this build turned out. I literally recommend Poly Props supplies to everyone and their CF100 has been an absolute dream to work with. I've been pulling 15-16 hours a day down the workshop and it's probably only going to get crazier! So sorry for being afk but I hope you guys think the results are worth it! #ignis  #ignisscientia  #finalfantasyxv  #finalfantasy  #chocobros  #chocobo  #ffxv  #igniscosplay  #prompto  #promptocosplay  #prop  #propmaking  #propreplica  #mcm  #mcmlondon  #cosplay  #ukcosplay  #ffcosplay  #rpf  #replica  #replicaprop  #commission  #madcatprops  #foam  #foambuild  #craftyourfandom 
Justice League Emblem
•
First cast from the mould, these will be available in the shop tomorrow.
•
Price will be £40 + shipping.
•
•
•
- #asdivision #therpf #replicapropforum #replicaprop #cosplay #cosplayer #cosplayers #propreplica #batman #batsuit #batfleck #tacticalbatsuit #techcowl #arkham #arkhamasylum #arkhamcity #arkhamorigins #arkhamknight #batmanbegins #thedarkknight #thedarkknightrises #batmanvsuperman #skwad #justiceleague #justiceleaguemovie
Justice League Emblem • First cast from the mould, these will be available in the shop tomorrow. • Price will be £40 + shipping. • • • - #asdivision  #therpf  #replicapropforum  #replicaprop  #cosplay  #cosplayer  #cosplayers  #propreplica  #batman  #batsuit  #batfleck  #tacticalbatsuit  #techcowl  #arkham  #arkhamasylum  #arkhamcity  #arkhamorigins  #arkhamknight  #batmanbegins  #thedarkknight  #thedarkknightrises  #batmanvsuperman  #skwad  #justiceleague  #justiceleaguemovie 
Unbuffed, unsealed ALCLAD II 107 Chrome. The fact that you can see my hand as well as you can in the reflection blows my mind. 
Tomorrow, I'll be buffing it gently, then applying a coat of ALCLAD II 600 Aqua Gloss Clear, and the day after will be another video of the final shine.

#replicaprop #replica #prop #props #replicapropforum #thereplicapropforum #rpf #therpf #tf2 #teamfortress2 #teamfortress #spy #Ambassador #theambassador #valvesoftware #alcladii #3d #3dprinting #3dprops #shapeways #cosplay #cosplayprop
Unbuffed, unsealed ALCLAD II 107 Chrome. The fact that you can see my hand as well as you can in the reflection blows my mind. Tomorrow, I'll be buffing it gently, then applying a coat of ALCLAD II 600 Aqua Gloss Clear, and the day after will be another video of the final shine. #replicaprop  #replica  #prop  #props  #replicapropforum  #thereplicapropforum  #rpf  #therpf  #tf2  #teamfortress2  #teamfortress  #spy  #Ambassador  #theambassador  #valvesoftware  #alcladii  #3d  #3dprinting  #3dprops  #shapeways  #cosplay  #cosplayprop 
FS - 3D Files
•
A few cool files are listed in the shop.
•
If you’ve seen something you like, me message as it may be available.
•
•
•
- #asdivision #therpf #replicapropforum #replicaprop #cosplay #cosplayer #cosplayers #dccosplay #batmancosplay #propreplica #batman #batsuit #batfleck #tacticalbatsuit #techcowl #arkham #arkhamorigins #arkhamknight #batmanbegins #thedarkknight #thedarkknightrises #batmanvsuperman #skwad #justiceleague #justiceleaguemovie #3dprinting #3dprops #marvel #marvelcosplay
FS - 3D Files • A few cool files are listed in the shop. • If you’ve seen something you like, me message as it may be available. • • • - #asdivision  #therpf  #replicapropforum  #replicaprop  #cosplay  #cosplayer  #cosplayers  #dccosplay  #batmancosplay  #propreplica  #batman  #batsuit  #batfleck  #tacticalbatsuit  #techcowl  #arkham  #arkhamorigins  #arkhamknight  #batmanbegins  #thedarkknight  #thedarkknightrises  #batmanvsuperman  #skwad  #justiceleague  #justiceleaguemovie  #3dprinting  #3dprops  #marvel  #marvelcosplay 
This sticky bomb gun is STILL on the way .... I think I’ve got like 4 more parts to print, then the crazy sanding and painting begins. #batmanbegins #thedarkknight #superherodiy #superhero #replica #replicaprop #cosplay #batman
Finally got around to finishing my Elder Wand. Friday the 13th felt like a good day to do it! I dremeled in the symbols on the band, weathered and highlighted with acrylics. Made from a carved poplar dowel & apoxie sculpt for the bulbs.

#cosplay #propmaking #harrypotter #deathlyhallows #replicaprop #dumbledore
After well over a year of building and procrastinating, I’ve finally finished my exact replica lightsaber made of solid aluminum and brass. Thank you to everyone that helped me with this project #metalworking #metalturning #starwars #replica #rpf #replicaprop #urbanworkshop #makerspace #maker #makers #make #rotj #lightsaber #luke #clickspring
After well over a year of building and procrastinating, I’ve finally finished my exact replica lightsaber made of solid aluminum and brass. Thank you to everyone that helped me with this project #metalworking #metalturning #starwars #replica #rpf #replicaprop #urbanworkshop #makerspace #maker #makers #make #rotj #lightsaber #luke #clickspring
After well over a year of building and procrastinating, I’ve finally finished my exact replica lightsaber made of solid aluminum and brass. Thank you to everyone that helped me with this project #metalworking #metalturning #starwars #replica #rpf #replicaprop #urbanworkshop #makerspace #maker #makers #make #rotj #lightsaber #luke #clickspring @clickspring1
Pacific Rim Pan Pacific Defence Corps badge on its first pull. A couple of tweaks and it will be ready for sale in the shop.
#pacificrim #pacifirimuprising #jaeger #kaiju #panpacificdefensecorps #replicaprop #bigredspropshop
The latest additions to my #IndianaJones #replicaprop collection. Picked up a Nurhachi urn and diamond from #TempleOfDoom and replaced my #holygrail from #LastCrudade
Pacific Rim badge sculpting almost ready for casting. #pacificrim #jaegers #panpacificrimcorpse #kaiju #replicaprop #pacificrimuprising #bigredspropshop
Getting some layering done for mark V
Getting some layering done for mark V
WIP metal lightsaber replica from A New Hope. @starwars #anewhope #lightsaber #lukeskywalker #lightsaberreplica #replicaprop
Replica prop building fascinates me. Especially after watching @therealadamsavage on #tested these last few years. Tonight I made my first from scratch prop. Two of my girls are cosplaying as the Moon Sisters from “Kubo and the Two Strings” for Halloween and one needed the magical pipe a chunk of riven red oak and some maple dowel and a little time at the lathe. Black oil paint, gold colored wax and a CA glue finish to simulate the shine of urushi.  Not too bad. And Fayth loves it!  #cosplay #kuboandthetwostrings #moonsister #oldwolfworkshop #replicaprop @therpf
Replica prop building fascinates me. Especially after watching @therealadamsavage on #tested  these last few years. Tonight I made my first from scratch prop. Two of my girls are cosplaying as the Moon Sisters from “Kubo and the Two Strings” for Halloween and one needed the magical pipe a chunk of riven red oak and some maple dowel and a little time at the lathe. Black oil paint, gold colored wax and a CA glue finish to simulate the shine of urushi. Not too bad. And Fayth loves it! #cosplay  #kuboandthetwostrings  #moonsister  #oldwolfworkshop  #replicaprop  @therpf
Here are some #sla reprints of the circuitry details for my #zeorangers / #ohranger blaster set. The sla is way better at capturing details and speeding up workflow. These parts are practically ready for #molding. Prints were done by my buddy over at @dark_mark_cosplay 
#powerrangers #supersentai #zeo #blaster #set #propmaking #rocketpunchstudios #rocketpunch #finishing #prop #replica #replicaprop #3d #3dprinting #3dprint
Been a long time coming, here is Thorn from Destiny. File was taken from myminifactory and I love the fact that there is no glue or screws needed to fully assemble the gun! Printed in Gold Hatchbox PLA and is massive, printed to scale. 
Available on our website www.aestheticcosplay.com #cr10 #creality #crealitycr10 #cosplay #aestheticcosplay #cosplayprops #destiny #destiny2 #destinyprop #thorndestiny #destinythorn #destinythornprop #microsoft #cosplayprop #3dprint #3dprinter #3dprinting #replicaprop #hatchbox #hatchbox3d #hatchboxfilament #hatchboxpla
Been a long time coming, here is Thorn from Destiny. File was taken from myminifactory and I love the fact that there is no glue or screws needed to fully assemble the gun! Printed in Gold Hatchbox PLA and is massive, printed to scale. Available on our website www.aestheticcosplay.com #cr10  #creality  #crealitycr10  #cosplay  #aestheticcosplay  #cosplayprops  #destiny  #destiny2  #destinyprop  #thorndestiny  #destinythorn  #destinythornprop  #microsoft  #cosplayprop  #3dprint  #3dprinter  #3dprinting  #replicaprop  #hatchbox  #hatchbox3d  #hatchboxfilament  #hatchboxpla 
JL Tactical BatSuit Kit
•
Tactical Cowl will be available next month, BatSuit Kits will be Dec/Jan
•
PM for more info 😉
•
•
•
- #asdivision #therpf #replicapropforum #replicaprop #cosplay #cosplayer #cosplayers #dccosplay #batmancosplay #propreplica #batman #batsuit #batfleck #tacticalbatsuit #techcowl #arkham #arkhamasylum #arkhamcity #arkhamorigins #arkhamknight #batmanbegins #thedarkknight #thedarkknightrises #batmanvsuperman #skwad #justiceleague #justiceleaguemovie #smoothon
JL Tactical BatSuit Kit • Tactical Cowl will be available next month, BatSuit Kits will be Dec/Jan • PM for more info 😉 • • • - #asdivision  #therpf  #replicapropforum  #replicaprop  #cosplay  #cosplayer  #cosplayers  #dccosplay  #batmancosplay  #propreplica  #batman  #batsuit  #batfleck  #tacticalbatsuit  #techcowl  #arkham  #arkhamasylum  #arkhamcity  #arkhamorigins  #arkhamknight  #batmanbegins  #thedarkknight  #thedarkknightrises  #batmanvsuperman  #skwad  #justiceleague  #justiceleaguemovie  #smoothon 
Hellboy B.P.R.D. police shield and leather wallet.
#hellboy #bprd . #bigredspropshop #mikemignola #replicaprop

https://www.etsy.com/uk/listing/549500106/hellboy-bprd-police-badge-wallet?ref=shop_home_active_1
Hellboy samaritan rounds.
#Hellboy #B.P.R.D. #bigredspropshop #mikemignola #replicaprop
 https://www.etsy.com/uk/listing/562187111/hellboy-samaritan-prop-single-bullet?ref=shop_home_active_2
Hellboy resurrection amulet.
#hellboy #bprd #bigredspropshop #mikemignola #replicaprop
 https://www.etsy.com/uk/shop/BigRedsPropShop?ref=seller-platform-mcnav
_________________________________________________  Better late than never! NerdBot Con was a blast and more pictures will be coming soon. Thanks so much to @bobafettfanclub for hanging out and supporting artists as always.
_________________________________________________
#bobafett #bobafettcosplay #bobafettcostume #mandalorian #starwars #starwarscosplay #starwarsfan #bobatime #starwarsprops #filmprops #movieprops #replicaprop #forcefriday #mandalorianmercs #mandomercs #501st #bobafettarmor #starwarsmovies #starwarsviii #cosplayphotography #rogueone #therpf #cosplaywip #movieprops #therpf #thereplicapropforum  #nerdbotcon #nerdbotcon2017
_________________________________________________ Better late than never! NerdBot Con was a blast and more pictures will be coming soon. Thanks so much to @bobafettfanclub for hanging out and supporting artists as always. _________________________________________________ #bobafett  #bobafettcosplay  #bobafettcostume  #mandalorian  #starwars  #starwarscosplay  #starwarsfan  #bobatime  #starwarsprops  #filmprops  #movieprops  #replicaprop  #forcefriday  #mandalorianmercs  #mandomercs  #501st  #bobafettarmor  #starwarsmovies  #starwarsviii  #cosplayphotography  #rogueone  #therpf  #cosplaywip  #movieprops  #therpf  #thereplicapropforum  #nerdbotcon  #nerdbotcon2017 
Heroes aren’t born, they are created. A special replica prop is coming soon to my TMNT museum. As seen on the 1990 TMNT film, this canister of ooze was responsible for creating the world’s most fiercest fighting teens! #tmnt #teenagemutantninjaturtles #ninjaturtles #movie #movieprop #movieprops #ooze #collectible #collectibles #neca #necatoys #collector #geek #replicaprop #replica
Mark V arm :)
Mark V arm :)
Started out with the first picture and a lot of work to get that weathered worn in look. #bladerunner #bladerunner2049 #pkd #deckard #k #offworld #sundownerfx #therpf #replicaprop #movieprop
First Halloween order is on its way to NYCC, keep an eye out for it there! #nycc #newyorkcomiccon #cosplay #kyloren #kylo #starwars #comiccon  #halloween #etsy #helmet #replicaprop
Need to finish my halo nornfang at some point
Need to finish my halo nornfang at some point
Winter project. My goal over the winter is to finish mastering my zeo blaster 3d print v2. Ive had these in a box for over a year now and im determined to get it done! 
This baby was modeled by @omcturnip and not it's not for sale ;) #powerrangers #supersentai #zeo #powerrangerszeo #ohranger #blaster #sword #combo #prop #replica #replicaprop #mastering #3d #3dprint #winterproject #rocketpunchstudios #rocketpunch
Back at it
Back at it
The Doubletake's buttstock and receiver look rather funky without the fabric cheek rests (which will not be modeled). #replicaprop #replica #prop #props #cosplay #cosplayprops #fusion360 #3d #3dmodeling #3dprops #3dprinting #wip #Titanfall2 #titanfall #doubletake #replicapropforum #thereplicapropforum #rpf #therpf #respawnentertainment
Final #silicone layer of the #brushonmold for the #fallout4 #nukacola bottle. Last time I failed to make a thick enough area to make a cut that would align when casting. Not visible on the picture, but I think it'll be better this time. Hard when I forgot to order #thickeningagent.. Next up is a #clay wall dividing it for the first half of the #supportshell. Just love the color shades the #rebound25 gives when adding some #pigment. Brush-on molds are economic but a hell of a lot more work! #smoothon #silcpig #glazing #maker #craftyourfandom #pcgaming #props #propmaker #replicaprop
Final #silicone  layer of the #brushonmold  for the #fallout4  #nukacola  bottle. Last time I failed to make a thick enough area to make a cut that would align when casting. Not visible on the picture, but I think it'll be better this time. Hard when I forgot to order #thickeningagent .. Next up is a #clay  wall dividing it for the first half of the #supportshell . Just love the color shades the #rebound25  gives when adding some #pigment . Brush-on molds are economic but a hell of a lot more work! #smoothon  #silcpig  #glazing  #maker  #craftyourfandom  #pcgaming  #props  #propmaker  #replicaprop 
The silver color on the grip was the original finish. I used a mix of enamels and steel wool to achieve this weather metal finish. #sundownerfx #bladerunner #bladerunner2049 #therpf #movieprop #replicaprop #deckard
Want one ? Link to my new shop sticks limited
Want one ? Link to my new shop sticks limited
Couple of replica box cutter props that i forgot that i had. These babies are made of rubber and are meant for stunts or throwing around. Perfect.for halloween shenanigans! Dm me if you want one. These were made by my good buddy @niktron85 
#replica #replicaprop #stuntprop #rubberprop #boxcutter #costume #halloween
Leaving no stone unturned on this #denix conversion. I re-knurled the sights, added engraving for the lock frame, and am sharpening up every angle. . .
Going to be the base for an all metal ANH Hero. Going to be a beauty for sure! 
#hansolo #smuggler #anh #anhhero #dl44 #dl44blaster #starwars #starwarscollection #replica #replicaprop #replicaprops #anewhope #starwarscosplay #starwarsnerd #needthis #needit
Trying my best to get that translucent skin effect on latex. luckily I have @tgoreart bloodline paint which helps alot. I am absolutely loving this paint. Pumping out these sketchbook covers has been fun! Got some more projects in the works! Keep an eye out! #horror #horroecollector #Halloween #gore #bloodline #createx #latex #latexmask #prop #replicaprop #necronomicon #evildead
MAIL CALL: Takagi Elfin Knights M2019 Blade Runner water pistol from Japan (next to my Coyle v4 replica)
#elfinknights #fullcock #bladerunner #takagi #bladerunner2019 #2019 #harrisonford #deckard #pkd #richardcoyle #propreplica #replicaprop #therpf
3 hours well spent 😎👌🏼upcycled my Christmas perler bead "lights" and used an old frame. 
#strangerthings #strangerthingswall #strangerthingsprops #replicaprop #diy #diyproject
Getting some shoulders done in the mark v build even detailed the inside for kicks .
.
.
.
By @twopennyprops_
Getting some shoulders done in the mark v build even detailed the inside for kicks . . . . By @twopennyprops_
Happy Anniversary Halo 3 the best Xbox live experience of all time
Happy Anniversary Halo 3 the best Xbox live experience of all time
Terminator t800 Endo arm I painted up for @raisedfist338 although I loved the finished prop it was a nightmare cast to work on, horrible to build, and needed lots of work to put right!! I still have the t-800 endo skull to do!! I will do it one day! #terminator #terminator2 #terminatorarm #terminatorprop #t800 #t800arm #t800prop #replicaprop #movieprop #lifesize #lifesizeprop
My Mark VI build from last may love it but worn it out from rushing it towards the end still managed to get some good shoots though
My Mark VI build from last may love it but worn it out from rushing it towards the end still managed to get some good shoots though
Halo CE pouch belt .
.
.
.
.
@twopennyprops_
Halo CE pouch belt . . . . . @twopennyprops_
Making old school costume for myself got the hard part done .
.
.
.
.
By @twopennyprops_
Making old school costume for myself got the hard part done . . . . . By @twopennyprops_
ghostbusters wand coming along nicely #ghostbusters #propbuilding #replicaprop
Upgrading my baldric from the costume one based on the sequels to a screen accurate leather one based on #curseoftheblackpearl hoping it'll be ready for #nycc 
#potc #pirates #piratesofthecaribbean #jacksparrow #jacksparrowcosplay #jacksparrowimpersonator #captjacksparrow #captainjacksparrow #captainjacksparrowcosplay #captainjacksparrowlookalike #leather #leatherwork #sword #cutlass #cosplay #cosplayer #cotbp #replicaprop #replica
This morning's coffee definitely tastes better in this CCJitters prop replica mug from @cwtheflash .  Fabricated by @jaykrib #ccjitters #theflash #cwtheflash #therpf #replicaprop #replicapropforum
And that's a wrap on the basic version of the Ambassador revolver! Snub nosed version, and custom engravings coming sometime in the future!

Model available on my Etsy store! See my profile for a link!

#replicaprop #replica #prop #props #replicaprops #cosplay #cosplayprop #teamfortress2 #teamfortress #tf2 #valvesoftware #fusion360 #moretocome #therpf #rpf #replicapropforum #thereplicapropforum #thespy #spy #3d #3dmodeling #3dprinting #3dprops #steam #scoutsmom
And that's a wrap on the basic version of the Ambassador revolver! Snub nosed version, and custom engravings coming sometime in the future! Model available on my Etsy store! See my profile for a link! #replicaprop  #replica  #prop  #props  #replicaprops  #cosplay  #cosplayprop  #teamfortress2  #teamfortress  #tf2  #valvesoftware  #fusion360  #moretocome  #therpf  #rpf  #replicapropforum  #thereplicapropforum  #thespy  #spy  #3d  #3dmodeling  #3dprinting  #3dprops  #steam  #scoutsmom 
This week I finally got around to making a display stand for my lightsabers. I made it similar to the stand for my helmets, so it fits in on the Wall of Awesomeness. And I can adjust it to add another piece later. #lightsaber #rotj #returnofthejedi #replicaprop #starwarsprops #craftyourfandom #pepakura #woodturner #woodturning #ironmanhelmet #bobafetthelmet #cybermen #nerdvana
Rocketeer update: first top coat of paint is on the helmet.
.
#rocketeer #therpf #helmet
I'm ashamed to admit that only today I've figured out the purpose of the component feature of Fusion 360.

Let's me get some even crazier details baked in, such as the hexagonal pattern on the magazine.

#replicaprop #replica #replicas #replicaprops #prop #props #cosplay #cosplayprop #3d #3dprinting #3dprops #replicapropforum #thereplicapropforum #rpf #therpf #craftyourfandom #respawnentertainment #fusion360 #wip #titanfall #titanfall2 #doubletake
_____________________________________________
The man himself, @lukechueh, inspiring Boba fans all over the world. Keeping it real @3dretro!👌✌️_____________________________________________
#lukechueh #designertoys #bobafetthelmet #3dretro #starwars #resintoys #starwarsfan #bobatime #vinyltoys #lukechuehboba #movieprops #replicaprop #forcefriday #mandalorianmercs #mandomercs #501st #bobafettarmor #starwarsmovies #starwarsviii #cosplayphotography #rogueone #therpf #cosplaywip #movieprops #therpf #thereplicapropforum #thedentedhelmet #tdh
_____________________________________________ The man himself, @lukechueh, inspiring Boba fans all over the world. Keeping it real @3dretro!👌✌️_____________________________________________ #lukechueh  #designertoys  #bobafetthelmet  #3dretro  #starwars  #resintoys  #starwarsfan  #bobatime  #vinyltoys  #lukechuehboba  #movieprops  #replicaprop  #forcefriday  #mandalorianmercs  #mandomercs  #501st  #bobafettarmor  #starwarsmovies  #starwarsviii  #cosplayphotography  #rogueone  #therpf  #cosplaywip  #movieprops  #therpf  #thereplicapropforum  #thedentedhelmet  #tdh 
Hanzo Bow/Quiver from Overwatch by @evevevev 
Bow is Insulation Foam with EVA foam details coated in Epsilon. Quiver is all EVA seald in Plastidip. ---------- #prop #propmakersofinstagram #bowprop #overwatch #hanzobow #handmade #scratchbuilt #replicaprop
Hellboy's Good Samaritan by @wardraw_studios 
Handmade from MDF, Sintra, PVC, and pine wood handle. (laminated 2x4). 3D printed emblem.
---------- #prop #propmakersofinstagram #pistolprop #hellboy #hellboyprop #handmade #scratchbuilt #replicaprop
New #lightsaber added to the collection. #LukeSkywalker #ReturnOfTheJedi hero lightsaber #StarWars #replicaprop
_______________________________________________________
From 11 to 11. 
This baby is basically ready for the junk mold now. My hands and back hurt... when I close my eyes I see nothing but a helmet.
Gonna have a nightcap and see you all in the morning! 
_______________________________________________________
#bobafetthelmet #bobafettcosplay #bobafettcostume #sculpting #starwars #starwarscosplay #monsterclay #sculptureclass #starwarsprops #filmprops #movieprops #replicaprop #claysculpture #mandalorianmercs #mandomercs #501st #bobafettarmor #starwarsmovies #starwarsviii #moldmaking #rogueone #therpf #claywork #cosplaywip #cosplaycommission #movieprops #therpf #thereplicapropforum #thedentedhelmet #tdh
_______________________________________________________ From 11 to 11. This baby is basically ready for the junk mold now. My hands and back hurt... when I close my eyes I see nothing but a helmet. Gonna have a nightcap and see you all in the morning! _______________________________________________________ #bobafetthelmet  #bobafettcosplay  #bobafettcostume  #sculpting  #starwars  #starwarscosplay  #monsterclay  #sculptureclass  #starwarsprops  #filmprops  #movieprops  #replicaprop  #claysculpture  #mandalorianmercs  #mandomercs  #501st  #bobafettarmor  #starwarsmovies  #starwarsviii  #moldmaking  #rogueone  #therpf  #claywork  #cosplaywip  #cosplaycommission  #movieprops  #therpf  #thereplicapropforum  #thedentedhelmet  #tdh 
PERFECT FIT 🔩 threaded back for my Thor Ragnarok Cosplay shoulder cap thanks to @forge3d.uk This printed great on the Anycubic i3 Mega with Zyltech PLA
.
.
.
.
.
.
#thor #thorragnarok #thorcosplay #thorragnarokcosplay #cosplay #nycc #cosplayers #replicaprop #replica #3dprinting #3d #3dprinter #3dprinted #anycubic #anycubici3mega #i3mega #pla #zyltech #purple #loki #thanos #marvel #hulk
🎬 Voila; the ZF-1 🚨

Childhood dream fulfilled! I've always wanted Zorg's iconic gun, the ZF-1 pod weapon system, from Luc Besson's 1997 film The Fifth Element. It's a little inaccurate, but I'll fix that up later. Gotta make a video of it's little blinking light sequence on the scope soon!

Also, Zorg cosplay partially complete!

#thefifthelement #fifthelement #cosplay #prop #replicaprop #replicapropforum
🎬 Voila; the ZF-1 🚨 Childhood dream fulfilled! I've always wanted Zorg's iconic gun, the ZF-1 pod weapon system, from Luc Besson's 1997 film The Fifth Element. It's a little inaccurate, but I'll fix that up later. Gotta make a video of it's little blinking light sequence on the scope soon! Also, Zorg cosplay partially complete! #thefifthelement  #fifthelement  #cosplay  #prop  #replicaprop  #replicapropforum 
And that's all four of my Titanfall models, now available as blueprints! Get them on my Etsy store!

http://etsy.me/2xj5MVM

#replica #replicas #replicaprop #replicaprops #blueprint #cosplay #cosplayprops #titanfall #titanfall #alternator #smartpistol #thunderbolt #r-101c #fusion360 #blueprint #etsy