an online Instagram web viewer
  • pembertontruckandequip
    Dylan
    @pembertontruckandequip

Images by pembertontruckandequip

Any guesses? New shop tooling, 1.5" QT100 construction.
Any guesses? New shop tooling, 1.5" QT100 construction.
Looking to buy a used cat 3304 engine, if anyone's holding. #caterpillar #3304 #950loader
Last job of the day, always forget to take before and during pics when it's  home time, but basically the plate under the ears on the back/top of this stick delaminated and cracked through the welds, caught just before she peeled the ears off. #Gouge, #weld, #blend and hometime. #airarc #lincolnelectric #commander500 #ln25 #dualshield #hyundaiconstruction #internationaltrucks #servicetruck #hdmechanic #pembertontruckandequipment #twighlight #ledlights
Closest I've been to the @whistlerbikeprk in years has been to do some repairs on this #kaiser #spiderexcavator. I miss riding #pembertontruckandequipment #hdmechanic #servicetruck #dhmtb
Broken scale pad bolt extraction, clean the hole, preheat the bolt to help unseize it and to ensure a good weld, burn in some heavy wall pipe hot, for a 1-1/8" scale pad bolt 1/8" 7018 rod works nice, give it a light slam with your favourite hammer to loosen the broken bolt, work it loose, wind that fucker out and replace. Inspect threads and torque these things properly. #pembertontruckandequipment #hdmechanic #boltextraction #brokenbolts #7018 #welding #lincolnwelders #lincolnelectric #commander500 #logtruck #scalepad #nightshift #hometimenowplease #internationaltrucks #westernstartrucks
Broken scale pad bolt extraction, clean the hole, preheat the bolt to help unseize it and to ensure a good weld, burn in some heavy wall pipe hot, for a 1-1/8" scale pad bolt 1/8" 7018 rod works nice, give it a light slam with your favourite hammer to loosen the broken bolt, work it loose, wind that fucker out and replace. Inspect threads and torque these things properly. #pembertontruckandequipment  #hdmechanic  #boltextraction  #brokenbolts  #7018  #welding  #lincolnwelders  #lincolnelectric  #commander500  #logtruck  #scalepad  #nightshift  #hometimenowplease  #internationaltrucks  #westernstartrucks 
Bolster repair, chasing cracks around the cup and saucer and new wear strips/shims under the bunks to finish the day. #pembertontruckandequipment #hdmechanic #servicetruck #loggingtruck #bcforestry #bclogging #welding #airarc #ln25 #7018
Pemberton Truck and Equipment is always looking for experienced heavy duty mechanics to join our team. We are a small but well equipped shop with two service trucks. We are not parts changers or lube boys, this is good shop to build experience in. Ideal candidate is an experienced journeyman mechanic but we invite all applicants to submit a resume to dylan@pembertonheavyduty.com #hdmechanic #servicetruck #wearehiring
Pemberton Truck and Equipment is always looking for experienced heavy duty mechanics to join our team. We are a small but well equipped shop with two service trucks. We are not parts changers or lube boys, this is good shop to build experience in. Ideal candidate is an experienced journeyman mechanic but we invite all applicants to submit a resume to dylan@pembertonheavyduty.com #hdmechanic  #servicetruck  #wearehiring 
We put the peelers where it counts and slag on the bandaids to keep em cost effective 👌🏽#overhead #lincolnwelders #commander500 #ln25 #dualshied #skidder #bladerepair #qt100 ##pembertontruckandequipment #hdmechanic #servicetruck
If I get called out to weld a tooth to a worn out twist lock adapter on the way home, and dinners getting cold, there's a 4000% chance it will look like 💩. Cleaned the area with a greasy rag, preheated with about 31 volts and 225ipm, kept the interpass temps around 10,000degrees, and cooled with liquid nitrogen. New adapters going on next week when these boys get a day off. #welding #ln25 #gunneedsanewtip #abittoohot #dualshield #savagery #theyrenotallpretty #hds #hammereddogshit @hammereddogshit
If I get called out to weld a tooth to a worn out twist lock adapter on the way home, and dinners getting cold, there's a 4000% chance it will look like 💩. Cleaned the area with a greasy rag, preheated with about 31 volts and 225ipm, kept the interpass temps around 10,000degrees, and cooled with liquid nitrogen. New adapters going on next week when these boys get a day off. #welding  #ln25  #gunneedsanewtip  #abittoohot  #dualshield  #savagery  #theyrenotallpretty  #hds  #hammereddogshit  @hammereddogshit
Idle adjust on a #hitachi rock truck. Idling around 400-500rpm, stalls when going into gear in the morning. Love how the #bosch injection pump on this #Mercedes engine has a high idle screw, but no low idle set screw on either side of the accelerator shaft. Guessing it's an internal adjustment. The #allison transmission doesn't shift out of neutral over 800rpm, but luckily the flexy pedal linkage rod is 4 feet long with all kinds of angles and bends, which makes it a fun time trying to get a consistent 700rom idle every time the pedal is pushed and released. Lol #pembertontruckandequipment #hdmechanic #nightshiftproblems #servicetruck #ledlights
Idle adjust on a #hitachi  rock truck. Idling around 400-500rpm, stalls when going into gear in the morning. Love how the #bosch  injection pump on this #Mercedes  engine has a high idle screw, but no low idle set screw on either side of the accelerator shaft. Guessing it's an internal adjustment. The #allison  transmission doesn't shift out of neutral over 800rpm, but luckily the flexy pedal linkage rod is 4 feet long with all kinds of angles and bends, which makes it a fun time trying to get a consistent 700rom idle every time the pedal is pushed and released. Lol #pembertontruckandequipment  #hdmechanic  #nightshiftproblems  #servicetruck  #ledlights 
Last week got to pull the wrapping off another brand new #deniscimaf #dh150 #mulcher. Install and setup, haul the old one back to the shop for a bit of an #overhaul before a full installation onto another machine without high flow mower plumbing. #variabledisplacementmotor #madeinquebec #vegetationmanagement #komatsu #whistler #beautifulbc #hydraulictuning
Some #hydraulic ramps we built a while back for a customers 25 ton equipment trailer. Runs off the dump trucks pony trailer dump valve. This is originally a single acting circuit, converted to double acting with the addition of return oil circuitry and a remote valve under trailer so it's safe and user friendly. The ramps are constructed of #qt100, continuously welded inside and out and internally gusseted. Try to break em! #ln25 #dualshield #7018 #welding #fabrication #pembertontruckandequipment #hdmechanic #hdrepair #servicetruck #deniscimaf #komatsu #vegetationmanagement
Some #hydraulic  ramps we built a while back for a customers 25 ton equipment trailer. Runs off the dump trucks pony trailer dump valve. This is originally a single acting circuit, converted to double acting with the addition of return oil circuitry and a remote valve under trailer so it's safe and user friendly. The ramps are constructed of #qt100 , continuously welded inside and out and internally gusseted. Try to break em! #ln25  #dualshield  #7018  #welding  #fabrication  #pembertontruckandequipment  #hdmechanic  #hdrepair  #servicetruck  #deniscimaf  #komatsu  #vegetationmanagement 
Some more pics from the #johndeere #skidder project. Had 4 new rods made for the bent arch and blade #hydrauliccylinders, cut, welded eyes on and repacked. #gouged out the damaged blade skins, cut and welded in new ones. Threw a ton of parts and labour at this thing, and still came out cheaper than anything similar on the market, should serve the new owner well. #welding #gouging #ln25 #dualshield #7018 #hydraulicrepair #bclogging #bcforestry #canadianlogging
Closed centre valve bank reseal on that now complete #johndeere #648g #skidder project. Spool packing and seals between sections were pretty cooked and leaking, found a blown oring and backup on the main relief, which would allow the pressure compensating pump to not destroke fully, generating heat and noise as some oil bypasses the blown relief at 3000psi. No longer leaks, quieter and cooler too! #pembertontruckandequipment #hdmechanic #servicetruck #hydraulicrepair
Closed centre valve bank reseal on that now complete #johndeere  #648g  #skidder  project. Spool packing and seals between sections were pretty cooked and leaking, found a blown oring and backup on the main relief, which would allow the pressure compensating pump to not destroke fully, generating heat and noise as some oil bypasses the blown relief at 3000psi. No longer leaks, quieter and cooler too! #pembertontruckandequipment  #hdmechanic  #servicetruck  #hydraulicrepair 
Another #tridrive #westernstar with #Detroit #dd15 power all fixed up. Came in with loss of power, stalling, failed high pressure bleed off test, rail pressures all over the place. Small, small amounts of metal in fuel filter bases which we're hoping is from the old high pressure pump shitting the bed 6 months ago which was changed by the dealer. Diagnosed as rail pressure limiting valve, ordered and waited for the bus to show up. Out of towners hate being broke down here, 2-3hours away from parts. Installed, passed fuel system testing and a quick road test to pick up this #madill #buncher. #carryon #pembertontruckandequipment #servicetruck #lowbedlife #lowbeddingisnotacrime #westcoastlowbedders
Another #tridrive  #westernstar  with #Detroit  #dd15  power all fixed up. Came in with loss of power, stalling, failed high pressure bleed off test, rail pressures all over the place. Small, small amounts of metal in fuel filter bases which we're hoping is from the old high pressure pump shitting the bed 6 months ago which was changed by the dealer. Diagnosed as rail pressure limiting valve, ordered and waited for the bus to show up. Out of towners hate being broke down here, 2-3hours away from parts. Installed, passed fuel system testing and a quick road test to pick up this #madill  #buncher . #carryon  #pembertontruckandequipment  #servicetruck  #lowbedlife  #lowbeddingisnotacrime  #westcoastlowbedders 
Sometimes it takes an experienced eye to make a cost effective repair to save an older machine from scrap. This #johndeere #648g has over 25000hrs and some of the issues that comes with it, but overall ok and most major components have evidence of being out at one time. Was parked for a bad main hydraulic pump, new pump over $7k. Got my hands on the core that the hydraulic shop said was irreparable, inspected and ordered new main relief and swash plate bearings (and had valve plate and swash plate lapped and coated due to weathering while being apart for a while). So she's running sweet for a fraction of the price of a new pump, so we have some budget to fix some of the other issues on this skidder. What I learned years ago working for gypo companies is always inspect your failed component before buying another, both for reasons of not getting screwed by your rebuilder, and also being able to repair components when it's within your shops capacity. #pembertontruckandequipment #hydraulicrepair #hydraulicdesign #hdmechanic #servicetruck #skidder #bclogging #canadianlogging #hydraulics #pistonpump
Sometimes it takes an experienced eye to make a cost effective repair to save an older machine from scrap. This #johndeere  #648g  has over 25000hrs and some of the issues that comes with it, but overall ok and most major components have evidence of being out at one time. Was parked for a bad main hydraulic pump, new pump over $7k. Got my hands on the core that the hydraulic shop said was irreparable, inspected and ordered new main relief and swash plate bearings (and had valve plate and swash plate lapped and coated due to weathering while being apart for a while). So she's running sweet for a fraction of the price of a new pump, so we have some budget to fix some of the other issues on this skidder. What I learned years ago working for gypo companies is always inspect your failed component before buying another, both for reasons of not getting screwed by your rebuilder, and also being able to repair components when it's within your shops capacity. #pembertontruckandequipment  #hydraulicrepair  #hydraulicdesign  #hdmechanic  #servicetruck  #skidder  #bclogging  #canadianlogging  #hydraulics  #pistonpump 
Last job before the long weekend for one of those customers that's always a pleasure to deal with. #pembertontruckandequipment #acrepair #airconditioning #servicetruck #hdmechanic #caterpillar #goodcustomer #134a #mtcurrie #beautifulbc
Another beauty Monday with friends George, Mike, and @serafina_castles. Some welding on this 25 ton trailer, getting a couple #def metering unit and battery related issues licked on this sweet #tridrive #westernstar #logger, and installing a #pacbrake compression release brake on an old #3406b. Thanks to our pal @walkerevans_hd for the referral. #pembertontruckandequipment #hdmechanic #servicetruck #welding #tracktorch #detroitdd15 #dieseldiagnostics